Welding a Broken Gate Frame
We cut out the cracked section, weld in a new piece of tube steel, and reinforce the joints. The gate is solid and swings without binding.
Service area
Walker Welding in San Marcos
San Marcos is about 30 minutes south. We travel there for larger projects like custom gates, structural repairs, and on-site welding for ranches and farms. The drive is straightforward, and we schedule accordingly.
5.0 stars on Google
From 94 verified customer reviews.
Local, and close by
Covering Dripping Springs, TX and the surrounding Hill Country..
Free estimates
Tell us what needs doing and we will come out and take a look.
Local service
Proudly serving San Marcos
San Marcos stretches along the I-35 corridor, with a mix of older neighborhoods near the square, newer subdivisions spreading west, and a lot of rural acreage and ranch land on the outskirts. The housing stock ranges from historic limestone homes to modern ranch houses on big lots, and the ground here is a mix of blackland clay and limestone, which shifts with the weather. The heat and humidity push metal to rust faster, and the occasional heavy storm can flood low areas. Gates and fences on these properties need to handle the elements and the wear from livestock and equipment.
We drive down from Dripping Springs, about thirty minutes on 290 and then south on I-35. Our crew arrives in a truck loaded with steel, welding gear, and all the tools for on-site fabrication. On the rural properties, we often have to navigate dirt roads and muddy gates, so we come prepared with boards and a winch if needed. We set up a safe work area, keep the sparks and grinding dust controlled, and clean up every bit of metal debris before we leave. The drive is straightforward, and we schedule San Marcos jobs to make the most of the travel time.
Walker Welding works across Dripping Springs, TX and the surrounding Hill Country, so a crew is never far from San Marcos. Call (512) 497-1674 or request a free estimate and we’ll come out and take a look.
Local demand
What San Marcos homeowners call us for
Structural Welding
Ranches and farms in San Marcos need heavy repairs on equipment, trailers, and building frames. We weld structural steel on site to keep things running.
Custom Gate Fabrication
The big properties here call for wide, heavy gates that can handle livestock and vehicles. We build them from tube steel and schedule 40 pipe.
Railing and Step Rail Installation
Newer homes with decks and porches need railings that stand up to the humidity. We weld galvanized or powder-coated steel to keep the rust away.
Mobile Welding
A lot of the work out here is a broken gate hinge or a cracked trailer frame. We bring the welder to the problem and fix it on the spot.
Typical projects
The kind of work we take on in San Marcos
Fabricating a Ranch Gate
We measure the opening, then cut and weld the frame and crossbars on site. We hang it on heavy-duty hinges and test the latch before we leave.
Repairing a Steel Railing
We grind out the rusted welds, fit new balusters, and weld them in place. The railing is level and secure again.
What we do here
Every service, available in San Marcos
Where we work
Across San Marcos
San Marcos Town Square
The historic buildings around the square have wrought-iron railings and gates that need careful restoration. We weld in new sections that match the old patterns.
I-35 Frontage
Commercial and residential properties along the frontage need security gates and fences. We install heavy-duty steel gates that can take the traffic and the heat.
Outlying Ranches
West of town, the properties open up into pasture and brush. We do pipe gates, cattle guards, and structural repairs on farm equipment and outbuildings.
Before work starts
Permits & local rules in San Marcos
City of San Marcos Permits
For new fence and gate installations within the city limits, you need a permit from the City of San Marcos Development Services. Check with them before you start.
Hays County Rules
On unincorporated land in Hays County, you may need a building permit for structural work. Contact the county's planning office to confirm what applies to your property.
Questions
San Marcos questions, answered
Reviews
What Dripping Springs homeowners say
5.0 average from 94 Google reviews
“Jerry replaced/repaired our driveway access 14' electric-opened farm gate. He responded to my initial inquiry right away, and did the job within a day which helped us out a lot. From start to finish, communication was great, both text and speaking over the phone. He sourced the new gate and all other materials for the job. He showed up on time, did the work well, actually improved the design of our gate, and cleaned up when he was done. Price was reasonable. I would not hesitate to recommend him.”
Dennis Caldwell
Google Review
“I highly recommend hiring Walker welding for all welding services. My front gate broke off the hinges completely. I called Jerry and the day of him and his wife came by to check out the gate. He quickly ordered new hinges and as soon as they came in, he was back at my house within 48 hours installing the hinges perfectly and leveling my gate better than before! Jerry did a great job and the cost was very reasonable.”
Ben Miseikis
Google Review
“Walker Welding did a fantastic job on the pool fence, step rail and gate for our unusual pila pool. The work was fast, super well done, and fairly priced. What nice people too. Highly recommend.”
Vann Hasty
Google Review
“We called him as a result of a referral from a friend. Jerry came out to look at what we needed to install a small privacy gate at our house. He provided us some suggestions as to the proper location and gave us an honest time frame as to when he would be able to complete the project. He was spot on and his fee was extremely reasonable. His work is excellent.”
Carlos Barrera
Google Review
“Truly a class act. Not only the best, most trustworthy welder in town, but also one of the best contractors I've ever come across. We had an unusual request for Jerry to install a metal ramp on our steep driveway. Jerry came by to take a look at the driveway and was incredibly proactive in suggesting the most effective and safest option. Every part of the process was absolutely flawless.”
Justin S
Google Review
Get a Free Estimate
Call or text us to schedule a visit. We will come to your property, look at the job, and give you a clear estimate. No obligation, no pressure.