Pedestrian Gate Installation
We measure the opening between the house and the fence, weld a steel gate frame, and hang it on heavy-duty hinges. The gate is fitted with a latch that works smoothly for years.
Service area
Walker Welding in Austin
We travel into Austin for residential and commercial welding jobs. The drive from our shop is about 30 minutes to southwest Austin. Common calls include fence repairs, custom metal fabrication, and structural welding for trailers and equipment.
5.0 stars on Google
From 94 verified customer reviews.
Local, and close by
Covering Dripping Springs, TX and the surrounding Hill Country..
Free estimates
Tell us what needs doing and we will come out and take a look.
Local service
Proudly serving Austin
Austin is a dense, fast-growing city where older bungalows and mid-century houses sit next to new infill construction on tight lots. The housing stock varies from 1920s cottages in South Austin to modern townhomes in the southwest corridor, and many properties have narrow driveways, small backyards, and fences that border alleys or busy streets. The climate here is hot and humid, with sudden thunderstorms that can rust metal railings and warp gate frames. The ground is a mix of clay and limestone, which shifts with the weather and makes fence post installation a careful job. Our crew drives in from Dripping Springs, about thirty minutes to southwest Austin, and we work on properties where space is often limited.
We arrive in a fully stocked welding truck, ready to work on site in tight spaces. For a railing job on a South Austin bungalow, we set up a small welding screen and work off the sidewalk or the driveway. For a fence repair in a gated community off Highway 290, we pull into the alley and work from there. We keep the mess contained with tarps and grinders with spark shields, and we sweep up metal shavings and debris before we leave. Because we are based nearby, we know the layout of the city, the HOA rules in the newer subdivisions, and how to get a welding rig into a backyard that only has a gate wide enough for a wheelbarrow.
Walker Welding works across Dripping Springs, TX and the surrounding Hill Country, so a crew is never far from Austin. Call (512) 497-1674 or request a free estimate and we’ll come out and take a look.
Local demand
What Austin homeowners call us for
Fence and Gate Installation
Tight city lots need fences that fit the property line exactly. We install metal pipe fences, wrought-iron gates, and privacy panels that match the neighbourhood look.
Custom Metal Fabrication
Austin homeowners want custom railings, gates, and yard art that fit the modern or historic style of the house. We weld steel and aluminum pieces to order on site.
Railing and Step Rail Installation
Stairs and decks on sloped lots in Austin require handrails that meet city code. We fabricate and weld step rails and guardrails for both new construction and older homes.
Gate Repair and Replacement
Driveway and pedestrian gates in the city take a lot of use. We fix sagging hinges, broken latches, and rusted frames, often working on gates that are decades old.
Typical projects
The kind of work we take on in Austin
Custom Handrail Fabrication
We bend and weld steel or aluminum to match the stair run and the homeowner's style. Each handrail is measured on site, cut, and welded to the brackets or the wall.
Fence Panel Repair and Replacement
We remove rusted or bent metal panels, weld new sections to match the existing fence, and paint the repair to blend in. The fence stays continuous and secure.
What we do here
Every service, available in Austin
Where we work
Across Austin
South Austin
South of the river, older bungalows and new townhomes sit on small lots. Work here includes fence repairs, custom railings for front porches, and gate replacements on narrow driveways.
Highway 290 Corridor
The stretch from Oak Hill into Austin has a mix of subdivisions and commercial properties. Jobs here include driveway gates, perimeter fencing, and structural welding for trailers and equipment.
Southwest Austin Subdivisions
Newer communities like Circle C and the areas near Brodie Lane have HOA rules on fence and gate styles. We install metal fences and railings that match the approved materials and colours.
Before work starts
Permits & local rules in Austin
City of Austin Fence Permits
Austin requires a permit for fences over a certain height and for any gate that opens onto a public sidewalk. Check with the city's Development Services Department before you start the job.
Historic District Rules
If your home is in a historic district, the city may have rules on the style and material of railings and gates. Get approval from the Historic Preservation Office before we fabricate anything.
Questions
Austin questions, answered
Reviews
What Dripping Springs homeowners say
5.0 average from 94 Google reviews
“Jerry replaced/repaired our driveway access 14' electric-opened farm gate. He responded to my initial inquiry right away, and did the job within a day which helped us out a lot. From start to finish, communication was great, both text and speaking over the phone. He sourced the new gate and all other materials for the job. He showed up on time, did the work well, actually improved the design of our gate, and cleaned up when he was done. Price was reasonable. I would not hesitate to recommend him.”
Dennis Caldwell
Google Review
“I highly recommend hiring Walker welding for all welding services. My front gate broke off the hinges completely. I called Jerry and the day of him and his wife came by to check out the gate. He quickly ordered new hinges and as soon as they came in, he was back at my house within 48 hours installing the hinges perfectly and leveling my gate better than before! Jerry did a great job and the cost was very reasonable.”
Ben Miseikis
Google Review
“Walker Welding did a fantastic job on the pool fence, step rail and gate for our unusual pila pool. The work was fast, super well done, and fairly priced. What nice people too. Highly recommend.”
Vann Hasty
Google Review
“We called him as a result of a referral from a friend. Jerry came out to look at what we needed to install a small privacy gate at our house. He provided us some suggestions as to the proper location and gave us an honest time frame as to when he would be able to complete the project. He was spot on and his fee was extremely reasonable. His work is excellent.”
Carlos Barrera
Google Review
“Truly a class act. Not only the best, most trustworthy welder in town, but also one of the best contractors I've ever come across. We had an unusual request for Jerry to install a metal ramp on our steep driveway. Jerry came by to take a look at the driveway and was incredibly proactive in suggesting the most effective and safest option. Every part of the process was absolutely flawless.”
Justin S
Google Review
Get a Free Estimate
Call or text us to schedule a visit. We will come to your property, look at the job, and give you a clear estimate. No obligation, no pressure.